PC Fan Ice Cooler

This is how to make a nice cold PC fan cooler.
What You Need

To make the PC fan ice cooler you need-
1. A circular tube that a PC fan can fit Nicely on. (I used a lava lamp box)
2. Tape
3. Extra Wires
4. A 12 volt wall adapter
1. A circular tube that a PC fan can fit Nicely on. (I used a lava lamp box)
2. Tape
3. Extra Wires
4. A 12 volt wall adapter
Attach the Wires

Attach the PC fan wires to the two extra wires
Place It On

Place the PC fan on the circular Tube.
Tape It

Tape around the PC fan. Make sure no air escapes.
Tape the Wires

Tape the wires so they run down the tube.
Twist One of the Extra Wires

Tape one of the wires around the outside part of the adapter
Tape It So It Does Not Come Off

Make sure you tape it so it won't come off
The Other Wire

Place the other wire into the wall adapters hole.
Tape It

Tape it so it won't move
Tape It to the Circular Tube

Tape it onto the tube so it is not hanging off the tube.
It Should Look Like This So Far

But we're not done :)
Wrap Paper Around It

Wrap paper around it so the wires won't show and it will look better.
Open the Bottom Off the Tube

When the bottom of the tube is open place a glass of ice on the bottom so the fan blows cold ice out the top.
Place the Tube Back On

When the tube goes back on the glass will not be visible.
Plug It In

When it is plugged in it will blast cold air. hope you liked the project :)