PC 3 / Soporte De Celulares & Caja Con Diseño De Conejo

INTRO

In this third project we are going to carry out "un soporte de celulares" and "una caja con diseño de conejito", very fast and easy in 23 simple steps.

Using the program Fusion 360 to design and Ultimaker Cura to view the volume created, in the course Digital Fabrication.

-Autodesk Fusion 360 (program)

- Ultimaker Cura (program)

- Computer (laptop acer i5)

- Wired mouse

1° Step

Open the program Fusion 360

2° Step Create

NEW PROJECT and name it , for example "Práctica Calificada 3_Parte 1".

3° Step

Open the project that we have created, go to the SAVE symbol and give it a new name for example "Soporte de celulares", it will be displayed in the data column on the left, where we will find our work file with a preview window.

4° Step

Now that we are in the file "Soporte de celulares", we go to CREATE SKETCH, we will visualize 3 planes because Fusion 360 is a program for 3D works.

5° Step

We will choose a plane of our preference according to the position of the piece that we will draw and we will begin to draw lines from the starting point, at the intersection of the two axes, according to the plan delivered in class and the reference presented by the teacher.

6° Step

We will start to draw our new piece according to our plan.

7° Step

We will close the drawing, and conclude by selecting FINISH SKETCH.

8° Step

We search CREATE, EXTRUDE to give it a thickness of 2 mm and we finish we go to MODIFY to use APPERANCES, we choose METAL.

9° Step

Now we are going to customize it, selecting a surface where we want to work, and we click it, when it is painted blue, we right click it and finally CREATE SKETCH. Within the SKETCH we go to CREATE and select TEXT, it asks us to select from one vertex to the other vertex to specify where the text is going to be written, for example "Diana P.", we can choose to change our font to our liking and we give it ok, and we will conclude by selecting FINISH SKETCH.

10° Step

We search CREATE, EXTRUDE and select the text and deselect what the text is not, we give it 1mm, we will also modify the edges with the MODIFY tool, FILLET 0.5mm.

11° Step

Finally we can see the finish of our first volumen.

12° Step

In the Ultimaker Cura program, we insert our Fusion 360 ° file, previously saved in " stl " format.

13° Step

We select SLICE, which will show us the time it will take to make this 3D volume, and we can see the simulation in Preview.

14° Step

We will start drawing our new 58x58mm square and conclude by selecting FINISH SKETCH.

15° Step

We search CREATE, EXTRUDE to give it a thickness of 2mm.

16° Step

We will choose an image of our liking for example "un conejo", we will go to the EDIT SKETCH, then we select INSERT - CANVAS, we choose the " dxf " image, we continue to accommodate the image to our liking and with the SPLINE tool we delineate the base silhouette of our image and then selecting FINISH SKETCH.

17° Step

We search CREATE, EXTRUDE to give it a thickness of 2 mm, Now selecting a surface where we want to work, and we click it, when it is painted blue, we right click and finally CREATE SKETCH.

18° Step

We use the SPLINE tool, delineate an element for example "the inside of the rabbit's ears or nose" and then select FINISH SKETCH. Also CREATE, EXTRUDE to give it a thickness of 2 mm or -1mm for a better finish of the "conejito", we continue until we finish the outlining of each element of our image.

19° Step

We select the base face and write the letter "P" (Projection) on the keyboard, then we click on OFFSET of 2mm, selecting the four edges, we click OK.

20° Step

Finally EXTRUDE 18mm above the new drawn plane and 2mm below the drawn plane.

21° Step

Finally we can see the finish of our second volume.

22° Step

In the Ultimaker Cura program, we insert our Fusion 360 ° file, previously saved in " stl " format.

23° Step

We select SLICE, which will show us the time it will take to make this 3D volume, and we can see the simulation in Preview.

Video of the project volumes in Ultimaker Cura.