Ozark Fallen Tree Swing Set

If you have a tree that fell over it you can make this great Ozark swing set.

PARTS

1.tree

2.rope

3.caribeners

4.big screw eyes

5.board

6.epoxy

TOOLS

1.sander

2.knife

3.blowtorch

4.drill

5.paint brush

First you need a seat, take your board (size may vary depending on what you need) and drill four holes to fit rope through about 1/2 an inch from the sides. Then sand board smooth, after that is done paint epoxy over the whole board with paint brush, and let dry. This is what it should look like when done.

Then cut a short rope(cut to preference)and blowtorch end. then add carabiner to loop.(notes on image) do on each side.

Then put screw eyes into the tree trunk and add carabiners to eyes put the carabiners upside-down so they don't unscrew.

Then cut two strips of rope and melt ends and tie to top carabiner and then to bottom.

And now your Ozark swing set is complete.