Origami Webcam Cover
This is a tutorial teaching how to make a webcam cover from paper. It is super easy. All you need is a piece of paper and 5 minutes of your time.
Supplies
Craft Paper
Scissor
Step 1: Measure Your Laptop Bezel
Take a scale and measure the height of your laptop bezel. It is usually between 1-2 cm.
Step 2: Cut the Paper As Per the Bezel Measurement
Now cut a piece from your craft paper where its length is 8 times the bezel height and width is 4 times the bezel height.
For example, if your bezel height is 1.5 cm, Craft paper measurement should be as follows:
length = 1.5 x 8 = 12 cm
width = 1.5 x 4 = 6 cm
Step 3: Fold Paper Into Half
Fold the piece of paper into half
Step4: Make Diagonals in One Half
Make diagonals in one half
Step5: Make Heart in Same Half
Make a heart in the same half where you made the diagonals. To make heart, follow the video attached below
Step6: Fold the Other Half Behind the Heart
Fold the other half behind the heart. Please watch the video attached below for more clarity.
Step7: Some Final Tuck-ins and Creases and You Are Done.
Now flip it in such a way that the heart part is behind and clean paper is in front. Fold the extras on both the sides towards inside. Make some creases and you are done. Now to understand it completely, please watch the attached video.