Origami Butterfly
![IMG_5235.jpg](/proxy/?url=https://content.instructables.com/FBY/6FHO/LW82OHDM/FBY6FHOLW82OHDM.jpg&filename=IMG_5235.jpg)
I made an origami butterfly because I found it to be interesting.
Supplies
15cm x 15cm or 6in x 6in piece of paper
![IMG_5227.jpg](/proxy/?url=https://content.instructables.com/FLV/JOA5/LW82OHCY/FLVJOA5LW82OHCY.jpg&filename=IMG_5227.jpg)
Fold the paper horizontally
![IMG_5228.jpg](/proxy/?url=https://content.instructables.com/FTA/TGZW/LW82OHCM/FTATGZWLW82OHCM.jpg&filename=IMG_5228.jpg)
Next fold the paper vertically
![IMG_5229.jpg](/proxy/?url=https://content.instructables.com/FW7/T5HW/LW82OHBR/FW7T5HWLW82OHBR.jpg&filename=IMG_5229.jpg)
unfold and flip over the paper and then fold 1 side of the paper to the other
![IMG_5230.jpg](/proxy/?url=https://content.instructables.com/FBR/JF7R/LW82OHC0/FBRJF7RLW82OHC0.jpg&filename=IMG_5230.jpg)
Again, unfold and fold the same way as the previous step on the very next side
![IMG_5231.jpg](/proxy/?url=https://content.instructables.com/FCV/EPW1/LW82OHBJ/FCVEPW1LW82OHBJ.jpg&filename=IMG_5231.jpg)
Unfold and then proceed to crunch the pieces together to make this shape.
![IMG_5232.jpg](/proxy/?url=https://content.instructables.com/F90/Y7NL/LW82OHCB/F90Y7NLLW82OHCB.jpg&filename=IMG_5232.jpg)
cut the tip of the right point into a round shape.
![IMG_5233.jpg](/proxy/?url=https://content.instructables.com/FU2/SZQR/LW82OHB6/FU2SZQRLW82OHB6.jpg&filename=IMG_5233.jpg)
unfold to where you're holding 2 layers of each of the folds in 1 hand each, then grab 2 of the folds and fold them inwards.
![IMG_5234.jpg](/proxy/?url=https://content.instructables.com/F5T/2M41/LW82OHBC/F5T2M41LW82OHBC.jpg&filename=IMG_5234.jpg)
After, flip the paper to the other side and fold the top on to the back with the end pointing out and make sure it latches onto the other side.
![IMG_5235.jpg](/proxy/?url=https://content.instructables.com/FJZ/EJIP/LW82OHB1/FJZEJIPLW82OHB1.jpg&filename=IMG_5235.jpg)
After all this has been completed, you have a butterfly!