Open-Source EEG 3D Printable Headset for Brain-Computer Interface

A fully open, 3D-printable EEG headset — designed for DIY neuroscience, education, and BCI experiments. Originally design was created for Ironbci BCI. You can adapt it for your needs if necessary

Source https://github.com/pieeg-club/ironbci_3D_EEG_Printable_Headset

I believe the headset is ready, but some work is needed to start, cables, connect the electrodes, and attach the battery from your side. Looks like better to use a 200 mA battery, not more, to ensure there's enough room inside the headset.

Dry Electrodes – no gel needed (As an example, I used this one - link)

You can adjust the strength of the connection between the electrodes and the skin through the straps.

Watch the full tutorial video here

Upload the Bender File from PiEEG Github here

You should figure out which Brain-Computer interface you want to use. For now headset was created for ironbci

A headset consists of a few parts,

main, box for BCI, and two caps

for Dry Electrodes, conenction on the image, cables inside the headset, electrodes - outside