Omniwing Godspeed

This is the omniwing godspeed. It is very fast, accurate and easy to build. Also, if "omniwing" is copyrighted or something tell me and I will fix it immediately.

You will need 2 pieces of printing paper, duct tape (it doesn't have to be duct tape but it is what I used.) Scissors, pencil, and some sort of measurement.

Pic 1-2. Fold in half the long way.
Pic 3. Unfold last step.
Pic 4. Fold in corner.
Pic 5. Unfold last step.
Pic 6. Fold corner.
Pic 7. Fold again.
Pic 8. Fold again.
Pic 9. Refold.
Pic 10. Repeat pics 4 to 9 on the other side.
Pic 11. Fold 2/3 in.
Pic 12. Fold in.

Pic 1. Crease here.
Pic 2. Cut last crease, discard remnant.
Pic 3. Fold on crease again.
Pic 4. Dot one inch in.
Pic 5. Cut from dot to corner.
Pic 6. Unfold.
Pic 7. Draw out crease.

Pic 1-2. Fold in half.
Pic 3. Unfold last crease.
Pic 4. Fold in.
Pic 5. Fold.
Pic 6. Fold again.
Pic 7. And fold again.
Pic 8. Draw out crease.
Pic 9-10. Dot on both sides.
Pic 11. Cut corners to dots.

Pic 1. Insert support into wings.(make sure that the lines line up.)
Pic 2. Tape here.

Have fun with your new plane!