Olive Man and His Pimento of Justice!!!
3527 Views, 6 Favorites, 0 Comments
Olive Man and His Pimento of Justice!!!
![IMG_2236.JPG](/proxy/?url=https://content.instructables.com/FSB/SF2D/FN82OFMT/FSBSF2DFN82OFMT.jpg&filename=IMG_2236.JPG)
![IMG_2238.JPG](/proxy/?url=https://content.instructables.com/FU1/UQRR/FN82OFMS/FU1UQRRFN82OFMS.jpg&filename=IMG_2238.JPG)
![IMG_2239.JPG](/proxy/?url=https://content.instructables.com/FUJ/5PUZ/FN82OFMN/FUJ5PUZFN82OFMN.jpg&filename=IMG_2239.JPG)
![IMG_2241.JPG](/proxy/?url=https://content.instructables.com/FGX/3KIY/FN82OFMJ/FGX3KIYFN82OFMJ.jpg&filename=IMG_2241.JPG)
I made this figure about a year ago. It is a superhero I call Olive Man. He has a Pimento of Justice which shines forth to destroy evil-doers. (OK it is really a 3 volt red LED hooked to a battery case and switch I got from a dollar store. The wiring was inspired by several LED flashlights I had seen here on Instructables).
Olive Man's head is a small ball I found in the backyard which I painted olive green. I mounted it on the body of an alien figure. I accomplished this via one of my favorite figure mod techniques. I use an awl to poke holes in the parts I want to join and then use a portion of paper clip as a support. Then add a dab of super glue to hold it together.
Then I used epoxy to secure Olive Man to the battery pack.
Olive Man's head is a small ball I found in the backyard which I painted olive green. I mounted it on the body of an alien figure. I accomplished this via one of my favorite figure mod techniques. I use an awl to poke holes in the parts I want to join and then use a portion of paper clip as a support. Then add a dab of super glue to hold it together.
Then I used epoxy to secure Olive Man to the battery pack.