Old Bearing Into Fidget Spinner

by ahmedebeed555 in Circuits > Tools

2043 Views, 2 Favorites, 0 Comments

Old Bearing Into Fidget Spinner

IMG_20171028_170542.jpg

Who doesn't want a spinner?

From the day it appeared and this gadget has been so trendy because of its magic.

If you are following my work you can know that I love Gyroscopes, Spinners and all rotating stuff.

Today I've decided to turn those old bearings into a spinner. I've managed to get four old stuck bearings in two sizes.

Here is my experiment.

Here is my Channel on Youtube:

AeroArduino

Get the Components and Tools

IMG_20171028_122805.jpg
IMG_20171028_122747.jpg
IMG_20171028_122823.jpg
IMG_20171028_123031.jpg

- Some Ball Bearings of small sizes ( of those used on skateboards ) . You can get them new form

Amazon US , Amazon UK , Amazon CA , Amazon FR , Amazon DE , Amazon ES , Amazon IT

- Paint Thinner ( I used it to clean the bearing )

- Tape

- Screw Driver . eBay , Banggood , Aliexpress

- Small Tie Raps

Clean the Bearing

IMG_20171028_123306.jpg
IMG_20171028_123121.jpg
IMG_20171028_123318.jpg
IMG_20171028_123535.jpg
IMG_20171028_131705.jpg

First I thought those bearings are dead. After all, I've got them from the car mechanics workshop. But I wondered how they would look like if I applied some organic solvent ( Painting Thinner for example ) to them.

I opened the bearing covers with the small screw driver and put them in some small amount of painting thinner.

It works.

The bearings are rolling so fast. I felt very happy. Now I can go to the next step.

Connect Them All and Test the Spinner

IMG_20171028_132337.jpg
IMG_20171028_133409.jpg
IMG_20171028_133204.jpg
IMG_20171028_134829.jpg
IMG_20171028_134856.jpg
IMG_20171028_170542.jpg
Cover Wind.jpg
Cover Learn.jpg

I wanted to connect the two bearings that make the hands to the center bearing.

First, I thought that I can use some Silicon Adhesive used in cars. But that didn't work. It was too weak.

Then I found another way from youtube. I connected the three bearing using tape around the three bearings circumference. Then I used two Tie Raps to tighten the Tape and to fix the bearings correctly.

Then I used scissors to cut the tail of the Tie Rap.

Now I have a full fledged Fidget Spinner that costed NOTHING.

Actually I had all the stuff at home and I only needed the bearing.

I was so happy making this project and you can easily make it too.

Thank you for reading my instructable...

Do you like audio books and want to learn something new on the Go ?

This instructable is brought to you by Audible, the famous Audio Books Platform. You can now listen to free Audio Books from Audible.

Listen to Free Audio Books on Audible US ...

Listen to Free Audio Books on Audible CA ...

Listen to Free Audio Books on Audible UK ...

Listen to Free Audio Books on Audible DE ...

Listen to Free Audio Books on Audible FR ...

That's all. Thank you for reading.

Here are some of my latest books on Amazon.

Learn By Making

Backyard Wind Turbines