Office Desktop Crane
by RS Industries in Living > Office Supply Hacks
1927 Views, 12 Favorites, 0 Comments
Office Desktop Crane
If your ever bored at the office just put this together and you can lift your boredom away.
You will need:
7 pencils
a few rubber bands
large binder clip
tape
string
magnet and/or paper clip
You will need:
7 pencils
a few rubber bands
large binder clip
tape
string
magnet and/or paper clip
Tower
tie 3 pencils together with rubber bands
Base
use binder clip as base and clip it to side the side of a desk or shelf. you can add a rubber band for added traction. then insert tower into binder clip and attach at bottom with rubber band.
Crane Arms
tie 2 pencils together with rubber bands. make 2.
Joints
attach first arm to tower with tape. then attach second arm to first arm.
Magnet/hook
tie rubber band around magnet as shown and tie string to rubber band as shown.( if you want to make a hook just unbend a paperclip to make the hook and tie it to a piece of string).
Over the Edge
Next take the magnet/hook and set it over the edge of the second arm.(if string gets caught you may need to place a piece of tape on the ends of the pencils to prevent string from getting caught. Note: if magnet is too heavy you may need to place a counter weight on the end of the first arm.