Odd-Shaped Window Treatment

I have a window that looks like this. It's pretty, but it lets in a lot of light. I wanted to find a way to cover it, at least sometimes.

This should also keep things cooler during the summer.

I measured it so that I'd know what I had to buy.

I wound up using the following items:

• Threaded rod (about 1/4"). It doesn't have to be threaded, but this is what they had.
• Drapery large enough to cover the window. I wanted it to be opaque (and thought it was). More on that later.
• Hot glue gun and glue sticks.
• Blackout fabric (because the drapery material wasn't opaque).
• Metal hook to hang the finished item.

In my case (yours will vary depending on the window shape) I needed to bend the rod into the correct shape. I used the curved back of a wooden chair (covered with a dish towel so that I wouldn't scratch it).

I laid out the fabric and used the hot glue gun to form it around the half-circle rod.

Oops.

The fabric was wrinkly and not opaque.

We'll fix that in the next two steps.

Yep.

• I bought blackout fabric (it looks like the stuff old spring-type window shades are made of.
• Traced the outline of the existing drapery and cut it out.
• Hot glued it onto the back of the drapery.

Voila.