Obstacle Avoiding Robot - TinkerCAD Simulation

by Pratheesha in Circuits > Arduino

1437 Views, 3 Favorites, 0 Comments

Obstacle Avoiding Robot - TinkerCAD Simulation

Circuit design Smashing Lappi Snicket Tinkercad 1

This is a TinkerCAD Simulation Video of Obstacle Avoiding Robot

Components Required

Dashboard.png
l293d.png
Motor.png
Ultrasonic Sensor.png
Arduino.png

You will require the Following Components

01. Breadboard - 1 No.

02 . L293D - 1 No.

03 . DC Motor - 2 Nos.

04 . Ultrasonic Sensor - 1 No.

05 . Arduino - 1 No.

Connections

circuit.png

Connect the Components as shown in the above image

Blocks

Blocks.png

Assemble the Blocks as shown in the above image for the Obstacle Avoiding Robot