Obstacle Avoiding Robot Simulation

by aadhu.dp in Circuits > Arduino

109 Views, 1 Favorites, 0 Comments

Obstacle Avoiding Robot Simulation

MY OBSTACLE AVOIDANCE ROBOT SIMULATION

HI,

I MADE MY Obstacle Avoiding Robot Simulation USING TINKERCAD SOFTWARE.THIS ROBOT WILL MOVE IN A FORWARD DIRECTION AND IF IT SEES ANY OBSTACLE <10CM IT WILL MOVE TOWARDS ITS RIGHT AND THEN IT MOVES IN FORWARD DIRECTION. THIS IS MY FIRST SIMULATION .....AND I WILL POST ALL MY UP COMING PROJECTS .


THINGS REQUIRED

sensor.png
motor.png
l293d.png
bread board.png
arduino.png

  • ULTRASONIC SENSOR - 1
  • BREAD BOARD - 1
  • MOTOR - 2
  • ARDUINO BOARD UNO-1
  • L293D - 1

CIRCUIT CONNECTION

circuit.png

YOU CONNECT THE WIRES BY WATCHING THE PICTURE. AND YOU CAN DO IT IN TINKERCAD.COM SOFTWARE.IT IS FREE...FOR SIMULATION

CODING

code.png

YOU CAN USE THESE BLOCKS TO MAKE THIS ROBOT.IN TINKERCAD.YOU CAN HAVE THIS PICTURE FOR REFERENCE.