Obstacle Avoiding Robot - B18

by vishaljegadeesan10 in Circuits > Arduino

3 Views, 0 Favorites, 0 Comments

Obstacle Avoiding Robot - B18

My First Robotics Simulation

This is a Simple Obstacle Avoiding Robot Circuit built using the TinerCAD Circuits.

Supplies

breadboard.PNG
l293d.PNG
motor.PNG
arduino.PNG
ultrasonic-sensor.PNG

Breadboard - 1 Nos.

L293D - 1 Nos.

Motors - 2 Nos.

Arduino - 1 Nos.

Ultrasonic Sensor - 1 Nos.

Connections

Connections.PNG

Connect the Connections as shown in the above picture

CodeBlocks

code-block.PNG

Assemble the Following Code Blocks as shown in the above picture