Obstacle Avoiding Robot - B16

by vishaljegadeesan10 in Circuits > Arduino

194 Views, 0 Favorites, 0 Comments

Obstacle Avoiding Robot - B16

My project.png
My First Robotics Simulation

I have created a simple Obstacle Avoiding Robot Virtual Circuit using the TinkerCAD Software

Supplies

arduino-uno.PNG
breadboard.PNG
DC Motor.PNG
l293d.PNG
Ultrasonic Sensor.PNG
  • Breadboard - 1 Nos.
  • L293D - 1 Nos.
  • Ultrasonic Sensor - 1 Nos.
  • DC Motors - 2 Nos.
  • Arduino UNO - 1 Nos.

Connections

connections.PNG

Make the following Connections as shown in the above picture

CodeBlocks

code-block.PNG

Assemble the Following CodeBlocks as shown in the above Picture