Obstacle Avoider Robot

by Debangshu Dutta in Circuits > Arduino

140 Views, 0 Favorites, 0 Comments

Obstacle Avoider Robot

Neat Vihelmo.png

This is a simple circuit of OBSTACLE AVOIDER ROBOT using TINKERCAD Website.

Supplies

image.jpg
breadboard.jpg
imagess.jpg
parallax-ping-ultrasonic-sensor-1.jpg
index.jpg

Tools needed are :-

1) Arduino - 1pcs

2) Breadboard - 1pcs

3) Motor Driver (L293D) - 1pcs

4) Ultrasonic Sensor - 1pcs

5) Motors - 2pcs

Neat Vihelmo.png

Do the circuit as shiown in the picture above using the TINKERCAD Website.

2021-10-04 (42).png

Do the coding (programming) for the circuit as shown in the picture above using the TINKERCAD Website.