OC: Oodammo Caliber Knex Sniper Rifle

by Mr. Muggle in Living > LEGO & K'NEX

4103 Views, 6 Favorites, 0 Comments

OC: Oodammo Caliber Knex Sniper Rifle

P1010953.JPG
P1010956.JPG
P1010961.JPG
P1010962.JPG
A few weeks ago I posted a forum topic about the fact that there were so many oodammo pistols. My opinion about it was that people should start posting oodammo rifles or other oodammo guns instead of only pistols. Many people disagreed and actually they were right. I shouldn't tell people what to post and what not to post. But that doesn't mean I can't post an awesome oodammo sniper Rifle:

People in the world, I present you: OC: Oodammo Caliber Sniper Rifle.
Stats:
Range: 90+ feet
Magazine: 4 bullets

Features:
Stock
Non-pinching handle
foldable + automatic unfolding bipod, can also turn 360 degrees
4 bullet oodammo magazine
scope
true trigger
foregrip
ram guide

Piece List

P1010962.JPG
connectors:
dark gray connectors: 50
light gray connectors:10
orange connectors:13
red connectors:38
green connectors:19
yellow connectors:81
white connectors:28
blue connectors:40
purple connectors:0
y connectors:47
tan connectors/blue caps:5
hinges: 1pair

rods:
green rods: 202
white rods:116
blue rods:41
yellow rods:2
red rods:12
gray rods:3 (one black coloured for the ram is prefered)

special pieces:
small rubberbands: 5
Big rubberbands: as many as you like
tape (thin)
Blue spacers: 8
Gray spacers: 4



Stock + Ram Guide

P1010976.JPG
P1010979.JPG
P1010981.JPG
P1010989.JPG
P1010990.JPG
P1010980.JPG
P1010993.JPG
P1010995.JPG
P1010996.JPG
P1010997.JPG
P1010998.JPG
P1010999.JPG
P1020001.JPG
P1020002.JPG
P1020003.JPG
P1020004.JPG
P1020005.JPG
P1020007.JPG
P1020008.JPG
P1020009.JPG
P1020010.JPG
P1020012.JPG
P1020013.JPG
P1020014.JPG
P1020016.JPG
P1020017.JPG
P1020018.JPG
P1020019.JPG
you might notice it bends a little, that is good, It has a complicated reason and a complicated cause.

Scope (optional)

P1010985.JPG
in this step you'll build the scope,
This is an optional step

Handle

P1020020.JPG
P1020021.JPG
P1020022.JPG
P1020023.JPG
P1020024.JPG
P1020025.JPG
P1020027.JPG
P1020028.JPG
P1020029.JPG
P1020030.JPG
In this step you'll build the handle

Fake Barrel + Foregrip + Magazine

P1020031.JPG
P1020032.JPG
P1020034.JPG
P1020035.JPG
P1020036.JPG
P1020037.JPG
P1010967.JPG
P1010966.JPG
construct...

Bipod (optional)

P1020038.JPG
P1020040.JPG
P1020041.JPG
P1020039.JPG
P1020042.JPG
P1020043.JPG
P1020044.JPG
P1020045.JPG
This is an optional step

Ram

P1020046.JPG
P1020049.JPG
P1020050.JPG
P1020051.JPG
P1020052.JPG
P1020100.JPG
Probably the most important part of the gun

Barrel + Trigger

P1020053.JPG
P1020054.JPG
P1020055.JPG
P1020057.JPG
P1020058.JPG
P1020059.JPG
P1020060.JPG
P1020061.JPG
P1020062.JPG
P1020063.JPG
P1020064.JPG
P1020065.JPG
P1020066.JPG
P1020067.JPG
P1020068.JPG
P1020069.JPG
P1020070.JPG
P1020071.JPG
P1020086.JPG
Though many oodammo guns have 3 layers, this is a 5 layer gun.

Assembly

P1020087.JPG
P1020089.JPG
P1020090.JPG
P1020091.JPG
P1020092.JPG
P1010992.JPG
P1010991.JPG
P1020093.JPG
P1020094.JPG
P1020095.JPG
P1020096.JPG
P1020106.JPG
assemble the gun in this step

Rubberbands

P1020097.JPG
P1020098.JPG
P1020099.JPG
P1020101.JPG
P1020102.JPG
P1020106.JPG
string the rubberbands in this step.

How to Use

P1010959.JPG
If you need help using the gun here is some.

To load a magazine:
-Pull back the ram.
-trigger sets into place automatically.
-put the pusher in first, then four oodammo bullets.
-string the little rubberbands around the pusher.

To shoot:
-pull the trigger

To shoot again:
-pull the ram back
-pull the trigger.

Fin

P1010953.JPG
have fun with the gun