No Sew Solar Powered Bike Pannier

by yukonlele in Outside > Bikes

1655 Views, 24 Favorites, 0 Comments

No Sew Solar Powered Bike Pannier

temp_-1771226206.jpg
Bike Pannier with Black Dog Solar 5W Panel Attached.

This is my first Instructable. It's a super easy no-sew solar panel attachment for my small bike pannier (27 L). I wanted something that would hold the panel on firmly, yet be adjustable. This seemed to be the easiest solution. These solar panels offer a straight charge, and will charge a cell in about 4 hours. I did a test ride and it works fine. Will update after my bike tour if there's any issues.

This was made at YuKonstruct, the northernest makerspace in Canada, at our members instructables build night.

Materials

Bike pannier, preferably with side pocket.
Black Dog Solar Panel 5W
Industrial strength velcro (2 strips of 4 inches)
Ruler
Exacto knife
2 swivel clasps

Stuff Pannier

temp_1168944341.jpg
Fill up pannier so you can fit panel on properly.

Hang Panel

temp_-353810213.jpg
Place swivel clasps over pannier rack hangers and clip swivel clasps through rings on solar panel.

Measure and Velcro

temp_-2096134968.jpg
temp_-1427640907.jpg
See how panel fits on bike pannier. Attach industrial strength velcro and fastener to pannier straps and back of solar panel.

Ta Da!

temp_1837383526.jpg
temp_1689941236.jpg
Re-hang panel, attach USB cord to device in front pocket and you are good to go! Solar panel easily folds up and fits in front pocket as well when not in use. I used Axiom 27L Transit Series panniers.