No 3D Printer Plastic Christmas Trees!

by PeRiWiNkLe ArT in Craft > Art

216 Views, 4 Favorites, 0 Comments

No 3D Printer Plastic Christmas Trees!

IMG_0079.JPG

You will need:

2 plastic cups, preferably green and yellow

A few plastic straws, any color you would like

Hot glue gun

And scissors

Get Your First Plastic Cup

WIN_20201210_11_28_41_Pro (2).jpg

Take your first plastic cup...

Cut in Half

WIN_20201210_11_30_06_Pro (2).jpg

Cut the cup in half with some decently sharp scissors.

Cut the Pieces Into Triangles

WIN_20201210_11_34_55_Pro (2).jpg

Cut the pieces in half then cut them into triangles.

Grab Your Plastic Straw

WIN_20201210_11_35_38_Pro (2).jpg

Cut Them

WIN_20201210_11_37_51_Pro (2).jpg

Cut them into little bits, about half a centimeter long.

Take Your Hot Glue Gun

WIN_20201210_11_44_53_Pro (2).jpg

And glue the pieces together like so.

This Is What Your Tree Should Look Like

WIN_20201210_11_46_16_Pro (2).jpg

Now Start Gluing on the Straw Pieces

WIN_20201210_11_46_35_Pro (3).jpg

This Is What It Should Look Like

WIN_20201210_11_52_45_Pro (2).jpg

Next Take Your Other Plastic Cup

WIN_20201210_11_55_03_Pro (2).jpg

Cut It Into a Star

WIN_20201210_11_58_04_Pro (2).jpg

And glue it on top!