Ninja Caltrops

by Krincles in Living > Toys & Games

48307 Views, 106 Favorites, 0 Comments

Ninja Caltrops

C:\Documents and Settings\Betty Webster\Desktop\Picture 054.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 047.jpg
So, you wanna be a ninja? Well heres something you might need.

"Caltrops" - A caltrop (calthrop, jack rock, star nail or crow's foot) is a weapon made up of two (or more) sharp nails or spines arranged in such a manner that one of them always points upward from a stable base (for example, a tetrahedron). Caltrops serve to slow down the advance of horses, war elephants, and human troops. It was said to be particularly effective against the soft feet of camels.[1] In more modern times, caltrops are used against wheeled vehicles with pneumatic tires. In Japan such devices were known as makibishi.

Gotta Get them camels!

Materials

C:\Documents and Settings\Betty Webster\Desktop\Picture 034.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 035.jpg
Materials: Scissors and a peice of sheet metal about 1" X 2".
Actually the size doesn't matter but I like this size.

Or if you are using thicker metal use tin snips

Cutting 1

C:\Documents and Settings\Betty Webster\Desktop\Picture 036.jpg
Here is where the scissors are needed.

Cut 2 lines length wize from each end about 1/3 of the way (see picture)

Cutting 2

C:\Documents and Settings\Betty Webster\Desktop\Picture 038.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 039.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 040.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 041.jpg
Now

Cut from the... just look at the picture

You want the final out come to look like a squished hour glass

Bend

C:\Documents and Settings\Betty Webster\Desktop\Picture 042.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 044.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 051.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 046.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 049.jpg
C:\Documents and Settings\Betty Webster\Desktop\qw45yhwrtuje57j3e57yhdgyhn.JPG
Here might be the hard or easy part. If you have thick sheet metal then find something curved and hammer it into shape.

If you got thin metal from a pop can or what have you then you can just bend it with your fingers.

Postition the metal so the hour

HURT PEOPLE!

C:\Documents and Settings\Betty Webster\Desktop\Picture 049.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 052.jpg
C:\Documents and Settings\Betty Webster\Desktop\Picture 054.jpg
Now! Throw it on the ground and it will always land with a point up.

If you made it with thin metal it will probly only hurt people with no shoes but if its thick you'll be ripping TROUGH CAMEL FEET!