Nike Cardboard PC ??

by MatisseM1 in Circuits > Computers

2047 Views, 3 Favorites, 0 Comments

Nike Cardboard PC ??

IMG_20180218_164301.jpg

Yeah, you read that right! I had no spare case for a test "retro gaming emulation type pc", but had a few shoeboxes left around the house. I took the biggest I had, and just thought "why not, """""lmao"""""".

Things You'll Need

-A box, preferably a big one (Nike/Adidas/Timberland/Crocs)

-Scissors

-Screwdriver

-More cardboard

-Screws (for the fan, so find what suits them)

-A fan (not a JB one, please)

-PC components

-Some foam

-A sharpie

Cutting Vents

IMG_20180218_164309.jpg

First, you'll need to make holes in the cardboard for air to flow. Cut a 100mm hole for the fan, and some more "screwdriver holes" to get some fresh air to the CPU.

Making Standoffs

IMG_20180218_170308.jpg
IMG_20180218_170813.jpg

Cut some cardboard and glue it to where screw holes are on your motherboard to support it.

Install Your Motherboard

IMG_20180218_165043.jpg

Make a Foam Base for Your Hard Drive

IMG_20180218_171047.jpg
IMG_20180218_171332.jpg
IMG_20180218_172110.jpg

All is in the title ^^

Connect Your Cables

IMG_20180218_173101.jpg

Don't Be Dumb (like Me)

IMG_20180218_170322.jpg
IMG_20180218_165300.jpg

Yeah, so, I didn't calculate the fact that the box could not be closed because of the fan touching the GPU... So I mounted it on the other side.

Connect Your PSU

IMG_20180218_175703.jpg
IMG_20180218_180423.jpg

I did not have a small enough PSU to put in the case, but anyway, connect it and fit it if you can (make some holes for its fan too)

Biem, You've Got M̶a̶i̶l̶ a PC

IMG_20180218_180938.jpg
IMG_20180218_181426.jpg

Here you go! Fun little project that you'll maybe have fun making ^^