Night Lamp Made by the Old Tape Cassettes

Hello guys......

Here I had made a Night lamp using the old tape cassettes.

This Lamp is very Easy to make..

I hope you like it.

Follow us on ...

YouTube - https://www.youtube.com/channel/UCBBRzYNzCALewaf20rg6dWg?view_as=subscriber

Facebook - https://www.facebook.com/kedar1705/

Requirements -

1. 12 V LED s * 2
2. Zip Ties * As required
3. 12 V DC Adapter * 1
4. Tape cassettes * 36
5. 12 V female pin * 1
6. Strong cable with two wires * As required

Tools -

1. Wire Cutter & skipper
   
2. electrical wire / insulating wire
   

Expect to the cassettes all other tools & requirements you will get in Hardware & Electronics store.

And all these will get you at cheaper price in stores than online...

So I would suggest to buy from stores...

SO LET'S START........!

Actually this lamp is cubic shaped...

So first we have to make walls of the cube using tape cassettes...

Use lamp walls using 6 cassettes and assemble casets by zip ties...

make 6 cassettes walls....

Now build the CUBE using the CASSETTE WALLS WHICH WE MADE...

Build the cube as shown in Images given above...

STEPS -

1. First remove some LED wire insulation cover.
2. Then mount them inside the cube of cassettes.
3. Connect the wires in the parallel connection.
4. Take the wire cable.
5. Insert the cable in the corner of cube as shown.
6. Zip the zip ties to wire as shown to hold the cable in the cube.
7. Connect cable terminals to the terminals of LED s.
8. Cut the excess part of zip ties.

Connect the 12 V female pin to the another end of black cable...

And connect the 12 V adapter to the female pin...

YOU CAN SEE MY PROJECT ON YOUTUBE....!

Follow us on -

YouTube - https://www.youtube.com/channel/UCBBRzYNzCALewaf20rg6dWg?view_as=subscriber

Facebook - https://www.facebook.com/kedar1705/

THANK YOU.................!