New Pyro Landmine

this landmine is desighned to be used with my pressure detonator, and gets a blast radius of about 5-10 feet, but the coverage is very dense, making it perfect for a pressure detonater. I WOULD RECOMEND THAT YOU USE THIS WITH A PRESSURE DETONATER! do not try to light it and run, it will not work.

Cut the Tube

this is self explanatory. cut a tube about 1 inch wide by 4 inches tall. these are aproxamate.

Slit the Top and Mushroom It Out

now cut about 2.5 inches down in four ways at 90 degree angles.

Add Cardboard to Complete the Funnel

now add cardboard in between the spaces. cereal box stuff works great. when youre done it should look like a funnel.

Make the Explosion Assembley and Add the Stillts to the Side

next take a firecracker and insert it into a hole inside a circle of cardboard. so you got a piece of cardboard that will fit over the hole IN THE BOTTOM, THE SMALL PART. then poke a hole and insert a firecracker. next take 3 or 4 stakes ( I used left over match sticks from making my ignitors) i recomend the igniter from BLUE FUSION, the one where you just wrap nichrome around the match head.

Insert the Explostion Assembly and Load

now strap the explosion assembly (firecracker inside the cardboard) onto the bottom. next is to fill the thing with bb's.

Add the Top and Finish

now, to keep the bb's from falling out, take a circle of cardboard and stap it hinge-like onto the top so that no bb's will fall out. to finish, make an igniter and strap it to the fuse, or however you want. when you want to use, just take of the top, flipping it over the hinge, so that the bb's are exposed.