Nes Recycle in Station HDD 3.5".
by sector-drone in Circuits > Reuse
2029 Views, 28 Favorites, 0 Comments
Nes Recycle in Station HDD 3.5".
![CIMG26312.jpg](/proxy/?url=https://content.instructables.com/F5C/MDRR/IZ6BISRT/F5CMDRRIZ6BISRT.jpg&filename=CIMG26312.jpg)
Hello everybody, I propose for my first comment, to recycle an old console NES out of order; in station() for hard disk sata 3.5".
Materials:
-old console
-Old hdd extern, damaged plastic
-Usb cable
-1x resistor
-glue gun
-soldering iron
Disassemble the Console !
![CIMG2645.JPG](/proxy/?url=https://content.instructables.com/F6Z/SEB2/IZ6BISVA/F6ZSEB2IZ6BISVA.jpg&filename=CIMG2645.JPG)
![CIMG2641.JPG](/proxy/?url=https://content.instructables.com/FXN/RQ3C/IZ6BISUL/FXNRQ3CIZ6BISUL.jpg&filename=CIMG2641.JPG)
-Disassemble all the console,
-And to separate the trolley blows up of the mother card.
-Get back the circuit usb/sata from the old case hdd
Fix the Circuit !
![CIMG2637.JPG](/proxy/?url=https://content.instructables.com/FOS/RH3M/IZ6BISUC/FOSRH3MIZ6BISUC.jpg&filename=CIMG2637.JPG)
Fix the circuit usb / sata to the support of the console.
Attention has what the hdd brings in good without forcing
-Soldered external transformer to power switch of NES.
-Soldered resistor to LED of NES in // to transormer and switch.
-install usb extension to port gamepad of NES.
- Glue usb port.
Fix All Part !!
![CIMG2636.JPG](/proxy/?url=https://content.instructables.com/FSN/C9MV/IZ6BISU0/FSNC9MVIZ6BISU0.jpg&filename=CIMG2636.JPG)
![CIMG2633.JPG](/proxy/?url=https://content.instructables.com/FI5/45QY/IZ6BISSO/FI545QYIZ6BISSO.jpg&filename=CIMG2633.JPG)
-Fix the support with usb /sata on the same screws.
-Fix extern power source.
Congratulations !!!
![CIMG2634.JPG](/proxy/?url=https://content.instructables.com/FWV/1WKO/IZ6BIST7/FWV1WKOIZ6BIST7.jpg&filename=CIMG2634.JPG)
![CIMG2644.JPG](/proxy/?url=https://content.instructables.com/F9E/M0K1/IZ6BISV0/F9EM0K1IZ6BISV0.jpg&filename=CIMG2644.JPG)
The console is ready to accept sata hdd 3.5" and Usb extension.
Thank you for having read me!!, excuse my English....google translation!!!