NES Controller IPhone4 Skin

Do you have a boring clear case for your uber cool iPhone 4? 

Well, here is your chance to make your iPhone4 to look even cooler!

1. iPhone 4: Kinda goes without saying...
2. iPhone 4 case with clear back side: I am using Belkin's case that Apple is giving away to iPHone4 users
3. Straight edge
4. Exacto Knife
5. Scissors: Craft level sharp tipped ones are best for craft purpose.  I am using Fiskars' Softgrip.

6. Skin Print out: Go to (http://torokun.deviantart.com/#/d2z56qo) and click on "Download Image" button to download high res image.  Print after downloading it.

*Set the printing size to 2.223x4.436inches in 600ppi.  Image resolution should retain 1334x2662.

*Use straight edge and Exacto knife to cut out the outside straight lines of the skin.

*Cut out the rounded edge of the skin using the scissors.

*I personally find it easy to cut around rounded edges using scissors rather than using the Exacto knife. 

*Make (+) incision in the part where the camera hole will go

*Again, I used scissors to cut out the camera hole. 

*If you got mad skillz to do it with hobby knives, go right ahead.

*If you are using scissors like myself, you have to cut it little bit at a time going around it.

*Put the cut out skin in the iPhone4 case facing down

*Snap together the iPhone4 into the case.

(I had to use my Harinezumi2 to take pictures from this point on... So please forgive me for the lower quality of pictures)

*All Finished!

(I switched the finished version of this picture with a clean version)

(I totally forgot "Select" and "Start" marking on the gray part.  The downloadable file has been fixed and will have those markings.  But not the ones in these photos.)

Is he playing SMB on his MBP?  Does that mean he is using an emulator with jailbroken iPhone4?

Don't do it Mr. M!!!

XD