Nerf Hunting Dummy / Target

This is my nerf hunting target.

it is usefull for making alot of them so you can make a shooting range.

Don't mind the bad photo's, I'm not a good photographer.

parts:

you need 14 red rods

6 yellow rods

3 white connectors

and 1 orange connector (2-fitting thingy)

4 of the yellow connectors

2 of the grey connectors (1-clip and a hole)

4 of the red connectors

6 grey rods (the longest, can also be orange)

4 combined connectors( the slide-in thingy)

just make this first.

do this to the side with 2 red rods and a white connector.

repeat on other side.

Don't really have a name for this.

just place a grey rod+red connector on top on the thing you just placed.

repeat on the other side.

Make this whit 2 red rods and a orange connector+ 2 of the grey connectors.

place the grey connectors with the circle side on the red rod.

Place the red rod thing on the top of the base.

you're now done with the base.

you're now going to make the target holder.

(A4 size)

make it like this.

Just clip the holder on the grey connectors.

It's now hanging on the top so if you hit it it will swing.

add a piece of paper with something of a duck on it.

Comment if you liked this instructable:-)