Nerf Electronic Gun!

Ok now  this instructable I will show you how to make your nerf gun look cooler. I'm enter this in to the usb  contest so please vote for it!!!! If you like what I build please subscribe to me!!!!

Stuff you need:
Broken electronics (you will need at least one broken flash drive)
Hot glue gun,(with glue sticks)
Some thing that will cut, 
A nerf gun,

OK! now take apart  your broken electronic all you need is the  circuit board.

Now glue The flash dive on your nerf gun by the nerf bullet holder.

Just glue your electronics were they bast fit  cause  I do not think we will have the same electronics.

OK now take off the black stuff at the end of the nerf bullet  and put hot glue in the hole make sure that it is   compete  cover so, no air comes through it.

Ok, now trace  the hole size of were the trigger hole is on to the circuit and cut  out the hole, repeat  this  step with a other circuit board.Look at the picture and notes.And glue it over the trigger spot.

OK take your wires and glue them were you want them I glue my to one side of the gun to the other side look at picture.

Look at picture.

OK look at the picture sand your edges  down and your done!!!!!!!