Nerf Zombiestrike Hammershot Mod

This Instructable goes over how to do a rubber band mod to a Nerf Hammershot

• 1-2 strong rubber bands
• duct tape
• Nerf Zombiestrike Hammershot
• Scissors

1. Cut a piece of duct tape approx. 1 inch long
2. Cut or rip it in half

1.Put 1/4 of the rubber band halfway along the piece of tape

2.Fold the piece of tape over the rubber band

1.Take the other half of the tape from step 2

2. Lay them over the piece of tape attached to the rubber band

3. Attach to the hammer of the gun, with the rubber band facing the front of the gun

To use it, you can either put the rubber band around the very front, or you can put it in the little notches in the tactical rail. Which one you choose depends on how much cocking resistance you want.