Nerf Titan Sniper Mod

This shows everything about this mod that I did.
I painted it battle radioactive

Ranges: 130-150 feet 30 degree angle
            100-120 feet flat held @ 3 feet above ground

Internal mods:

venetian blind-type AR's taken out

sealed all air hoses

sealed pressure release valve


External mods:

custom stock

custom handle area

custom bipod

barrel/ missile attachment.

PLEASE NOTE
I also made a homemade silencer that has holes drilled in half inch CPVC in a spiral pattern. It is only compatible with streamlines because the barrel is somewhat long and the air would escape through the bottom holes.

I took the rails of an old broken longshot and glued them onto the bottom.

I took off that ugly thing that holds the hornet in place.

I sawed off the other ugly thing on top that helps you pump when its on the ground.

I basically took off the other side of some cheap 2x toy binoculars and drew a little dot w/ marker.

I have never seen this done before. I took a longshot barrel, sanded off the grooves at the bottom that are inside of it so I could detach it and make it more portable. I also took out the AR on the missile attachment so the barrel would nest inside of it for cosmetics and support.

Remember how I said I could take the barrel off? Well, I can also fit the missile on there now.

all parts and components except silencer