Nerf Tactical Ammo Box

This is the guide for a tactical ammo holder that can be added to a nerf belt to provide backup ammunition. Read on to find out how to make it!
EDIT: One of my followers, Nerfanator135, figured out you can actually fit a nerf magazine/clip in the ammo box instead of darts, so just another use! Props to you, Nerfanator135!

To make this, you must first mark this pattern on a piece of cardboard using a sharpie or pencil. The measurements are in centimeters, not inches. Then, cut it out.

In this step, drag a scissors across the areas that you should fold, which are shown in the previous step. This will help break in the cardboard at the area that you want to fold. Then fold the box together a few times to get is ready. After that, unfold it and cover it in duct tape.

This is an optional step, but I covered mine in a strip of digital camo duct tape for a more militaristic look.

For this step, I took a piece of duct tape and wrapped it around itself to form a loop, with the sticky side facing out. Then I covered it with duct tape with the sticky side facing in so that I wouldn't have the box getting stuck to me.

For this part, I took a small strip of duct tape and wrapped it around a mega dart, sticky side facing out. Then, I stuck the loop to the bottom of the ammo box and pulled out the mega dart. After that, I added a strip of tape over that.

This is another optional part. What i did is write "E12/M1 AP," basically meaning it is an ammo pack with 12 elite darts and one mega dart. Then I added electrical tape around the bottom for no reason other than the fact that it looked cool.

By following these steps, you should have a neat nerf ammo box that will give you some extra oomph next game. Thanks for reading!