Nerf Stefan Dart From an Elite
by tinyhooman in Outside > Launchers
2041 Views, 1 Favorites, 0 Comments
Nerf Stefan Dart From an Elite
Hey guys! Today I have made my own stefans without buying foam!
Stuff needed
Nerf gun with no dart posts
Elite dart
Xacto knife/any other thin tool
Pros
Accuracy(about same accuracy as koosh darts)
Power(A lot better than a normal elite)
Cons
Can't really think of any, sorry.
Stuff needed
Nerf gun with no dart posts
Elite dart
Xacto knife/any other thin tool
Pros
Accuracy(about same accuracy as koosh darts)
Power(A lot better than a normal elite)
Cons
Can't really think of any, sorry.
Pry Off the Dart Tip
This attempt I didn't only get the rubber off, but this will take practice anyway.
Cutting
Cut the dart a little over half, and discard the foam
Done!
You have made my dart. Congrats.
Also, this was hitting 90 FPS in my sledgefire slug for me. This may differ for people with gray triggers(obviously) and with a grey trigger this would probably get 60-70 with sledgefire slug shell.
Also, this was hitting 90 FPS in my sledgefire slug for me. This may differ for people with gray triggers(obviously) and with a grey trigger this would probably get 60-70 with sledgefire slug shell.
Tips
If the tip starts coming off, just glue it back on.
Rear load sledgefire slugs with this. It's a lot easier then stock darts.
Make many of these. They are good darts.
Rear load sledgefire slugs with this. It's a lot easier then stock darts.
Make many of these. They are good darts.