Nerf Scope

With this cool little nerf scope, you can have inproved cosmetics, and a new attachment. However, I will not claim that this will increase your accuracy. With that said, it does look cool, and is sure to make some of your guns look better.

For this part, you will need a 3/4" pvc pipe coupler and a small length of 3/4" pvc, between 3 or 4 inches. At this point, use a saw to cut the coupler in half.

Next, attach both ends of the coupler to the main piece of pvc. Then, wrap electrical tape around it. Whatever you don't get with e-tape, use a sharpie to take care of.

At this point, unscrew the top of your tactical rail clip, until you can slip some zip-ties under there. Then screw it back on. After that, use the zip ties to attach the scope. Then cut off the ends of the zip-ties.

This just shows what this thing looks like on a longshot.

By following this guide, you have made a cool nerf scope that looks pretty cool. Thanks for reading, and good luck!