Night Finder to Airsoft

by yeah i know in Outside > Launchers

6898 Views, 8 Favorites, 0 Comments

Night Finder to Airsoft

DSCI0054.JPG
My friend and I were bored one day, so we decided to make a detachable, sturdy air soft Nerf thing...
SOO... here's what ya need...
-One Nerf Night finder (preferably modded, I added a BB gun spring)
- 2 pins (at least one)
- 2 Rubber Bands
- Scotch Tape
- Air soft BB's
- A Nerf dart (can be a Stefan or old dart)
- Scissors
- Drill (small bit)
- Yellow or longer knex piece (or something you could use as a ramrod)
- TARGET (preferably human, heh heh heh >=D)

This is the harder version, receiver 545 made an easy one

Btw this is my first instructable... and the dates on the pictures are wrong, i made this November 2009.

DSCI0056.JPG
Drill straight through little exposed barrel between blue (or yellow, if you just bought it) parts.

DSCI0059.JPG
Cut off end of nerf dart. Tape around the end.

DSCI0053.JPG
Insert Nerf tube into barrel. It only works from here on if you take the air restrictors out. Insert taped side in first.

DSCI0060.JPG
Stick needles through the hole and the taped Nerf foam, and out the other hole. Do the other needle on the opposite side.

DSCI0053.JPG
Stick bb inside the tube. Push it down with knex piece (ramrod). If done right it should stop at the needles. Sorry the picture is the same as step 3. Apparently you can't change the labels.

DSCI0052.JPG
Put rubber bands on end. Pull back and fire. <Warning always use eye protection when playing with airsoft.> Now you're done! =D. You can remove this attachment whenever you want.

Fps Ratings-
Test 1- 143.07
Test 2- 141.14
Test 3- 135.35
Test 4- 137.93
Test 5- 236.63 ?
   Average= 158.83