Nerf Jolt Mod(Byte TH-2)
The 2 is for the version.
Note the sloppy paint job.
Note the sloppy paint job.
Another Layer of Tape
if you didn't do the other mod, follow these: unscrew the 4 screws on the bottom, And add 2 layers of tape to the plunger head.
If you did do the other mod, follow these: unscrew the 4 screws again and add another layer of tape to the plunger head.
If you did do the other mod, follow these: unscrew the 4 screws again and add another layer of tape to the plunger head.
Do X2 Rubber Bands From the Last One(8 Is Our Rubber Bands Now)
Attach the silencer from the other instructable, add another four rubber bands.
Paint Job
It's so sloppy.
Done!
Did ya notice I was x2ing everything?
Anyway, I will be doing a line of 4 step jol mods.
Anyway, I will be doing a line of 4 step jol mods.