Nerf Gun Cardboard Target Box

Nerf gun darts seem to always be flying around the house so this was a quick project for a young boy to have some target practice while keeping his darts in one place.

Cardboard Box

Tape

Markers

String

Scissors

The first step was to cut one side of the box off. We used this to make the target.

The other sides we folded them pointing out to make a funnel for the darts incase they were not on target.

With the cut piece of cardboard we used the tape as a guide to make good circle.

Follow the line and cut out the circle target.

Color the target how you would like.

On the top of the box we punched 2 holes for us to push a string down to hold the target.

With the string through the holes cut a piece of tape and stick it on the back of the string and then stick the target to it. We did not cut the string until we knew where we wanted the target.

All done. Time for some target practice!