Necklace Display

by buildingandblogging in Craft > Felt

545 Views, 9 Favorites, 0 Comments

Necklace Display

20140302_185701.jpg
20140302_193335.jpg
20140220_185426.jpg

This necklace display works pretty good and was easy to make. I had a quark board laying around that i was using and decided to use that for the board. I sanded and painted the frame black. Cut fabric to fit the quarked part and then glued it down. Simply added hooks and the necklaces and it's done.

get felt here

Supplies and Tools:

20140226_181802.jpg
20140220_174235.jpg
20140302_200621.jpg
20140301_145247.jpg
20140302_132825.jpg

Supplies

tack board

sand paper

black paint

tack/hooks

cheetah felt

glue

Tools

razor blades/sissors

glue

paint brush

Sand and Paint Frame:

20140301_133408.jpg
20140226_181756.jpg
20140302_185718.jpg

I used a standard quark board with a frame on it for my project. Your going to want to sand the the frame down so the paint will stick to it. Make sure to get the inner edge. Then you are going to want to paint the frame I went with black.

Adding Fabric and Hooks:

20140302_193331.jpg
20140302_133051.jpg
20140302_193233.jpg
20140302_193228.jpg

You can pick up fabric pretty much anywhere I used cheetah print for this project. I used a sissors to cut the fabric making sure it fit in the frame. Then I used a brush to spread the glue out evenly on the quark board laying the cut fabric on the glued surface. Once the glue dries you need to add your hooks. You can put the hooks on how ever you decide looks best for your necklaces.