Neat Way to Open Power Supply

by keanlay in Circuits > Electronics

5468 Views, 10 Favorites, 0 Comments

Neat Way to Open Power Supply

13 10:02 PM.jpg

Tools

13 9:57 PM.jpg
Hobby (wireman) Saw
Chisel
Hammer
Clamp or Vise

Secure the P Supply

13 9:57 PM.jpg
Use clamp or vise to hold p supply in position

Break the "weld"

13 9:57 PM.jpg
As most power supply are chemically bonded, use saw to remove material about 0.5 to 1 mm on the long sides which does not hv connectors

Open It

13 9:57 PM.jpg
Use chisel to crack and break remaining bond on the un-saw sides. Use chisel to pry and twist to neatly open it up

Opened Case

13 9:57 PM.jpg
Done. Isn't it neat?