Narrow Foot Rest for Manual Wheelchair Use in Tight Spaces

by uatpat in Living > Health

225 Views, 1 Favorites, 0 Comments

Narrow Foot Rest for Manual Wheelchair Use in Tight Spaces

person in wheelchair with face.jpg
front view without person.jpg

This is a footrest that can be added onto a standard manual folding wheelchair. This allows the persons feet to be closer to the wheelchair, which is helpful for navigating tight spaces. The actual lengths and connection points will vary from wheelchair to wheelchair but the concept is easily adjustable for anyone.

The wheelchair also folds up easier with this cabled footrest.

Supplies

sideview of footplate.jpg
crimp and cable size.jpg
  1. 1.5in x (2 shoes width + a little extra) flat steel (1/8 in. thick)
  2. 1/4 in foam, same size as the flat steel
  3. 3/16 steel cable with plastic coating about 3 feet
  4. Several U-bolts or crimps to hold the cable in the correct location

FALZ1HZLT2Y7TXS.jpg
backside of footplate.jpg
  1. Glue foam to steel plate (we used a piece of foam that already had an adhesive side, otherwise use glue to put them together)
  2. Drill a hole (bigger than the diameter of the cable) and feed the cable through

FU3TH5FLT2Y7TXL.jpg
clamp view.jpg
ubolt view.jpg
  1. Attach the crimp U-bolt
  2. Pull the cable through the frame, and then cut the excess cable off

Finished Product

FXXR051LT2Y7TXB.jpg
front vew wheelchair.jpg
side view in wheelchair.jpg
FTKJN4ULT2Y7U0J.jpg

Here are the images of the final product. Now, the individual can navigate tighter spaces and the wheelchair is easier to fold up!