N-railway Trees (1/160 Scale)

a track is fun, all trains that drive around. But a bit of decoration can be more fun.
Here I show you, how you can make trees.



link to my other trees:  https://www.instructables.com/id/N-railway-pine-trees-1160-scale/

We start with a piece of electrical cord. This is cut in pieces of 10 cm. And then stripped.

Then there is a trunk and branches are twisted and the basic shape of the tree determined.
I have three different shapes.

All the weaknesses of the tree, as the trunk and branches. Are then reinforced with solder.

The places where leaves have to come are to be injected with spray glue and then the colored sawdust sprinkled on the tree.

If there are bare spots, you can repeat this operation.

All well and dry?

here are my result:

have fun

dROID