My Sonic Screwdriver

This is my first instructable so hear goes nothing okay today i am going to show you how i made My Sonic Screwdriver

hear is what you need to start with
1.A pen type light of any style
2. Scissors (The ones I have are made to do some heavy cutting)
3.1 Roll of Black Electrical Tape and a pice of white paper
4.Heavy duty straw
5.small bolt and a pair of pliers

take you bolt and screw it on you straw it mite be a little hard but that is where the pliers come into play . now that you have your bolt on the straw take your Scissors and cut the tip off and set aside

now that you have your bolt on the straw take your Scissors and cut the tip off and set aside

now wrap the electrical tape at the cover on the pen light tip just leaving the tip of the straw. Now cut you small piece of paper the size of a pack of smokes wrap it around your pen. now wrap the top with black tape and the bottom as well but leave some room so you can change the batteries and there you go i hope all like it let me know