My Desk Top Organizer

I will be showing you how to make my desk top organizer

-Cardboard box

-Exacto knife

-Ruler

-pencil

First thing to do is to get Cardboard. Second thing is to cut straight a line on the top of the cardboard, the length of the cardboard should be 35 cm and the with should be at least 20 cm. After when you did that next make 1 slot on each side of the cardboard. And when your making the slots the measurements, It should be 5 cm on both sides. And the slot length is 15 cm in.

For the side cut out 2 congruent sides. The length is 25 cm and the with is 17 cm. When your finish that part the next step is to cut the left side of the cardboard and the cut should be 6 cm. then when you finish that cut 15cm away from the cut on the right side, And move it down on the bottom of the cardboard

Last but not least for the back it's going to be similar to the top base. The length is 35 cm and the with is going to be 20 cm. After that what you want to do next is to make 1 slot on both sides of the cardboard, And the measurement for the slot is 5 cm and the cut is 15 cm deep.

the first thing you want to do is to. Start cutting on the left side of the cardboard, so when your starting to cut the left side make a rectangle 2 cm away from the slot. So when your cutting don't cut all the all down cut the surface of the cardboard you should see the flutes when you cut the surface of the cardboard. And when your cutting the measurements are. length is 18 cm with is 6 cm you should have made a rectangle.

Once your finish the rectangle make a 3 boxes 4 cm away for the rectangle. When your making the boxes put them in a row. All the boxes should be 4 cm for the length and be 3 cm for the with. One more thing when your cutting the the small rectangles don't cut all the way cut until you see the flutes then cut again, There should be no flutes in the 3 boxes.

When your finish that you'll will move on too the final steps. Make another rectangle box 4 cm away from the 3 rows. This box/rectangle will hold your calculator. The length of the the box/rectangle will be 13 cm and the with of the box/rectangle at least 8 cm. Remove the surface and the flutes from the cardboard.

This is the last step if you have lead for lead pencils you can make. A small rectangle box the length is 8 cm and the with is 2 cm. And the can go 2 cm away from the 3 rows and on top of the calculator. Cut the surface and then remove the flutes and thin your done.