My DIY R-Strap (No Additional Parts, Materials, Tools, Skills, or Modifications)
by beantown53 in Craft > Photography
4302 Views, 3 Favorites, 0 Comments
My DIY R-Strap (No Additional Parts, Materials, Tools, Skills, or Modifications)
My instructable required no additional parts, materials, tools, skills, or modifications to the existing strap. It just reconfigures what you already have into what you want.
Insert the Left-side Strap Into the Left Loop
1) Disconnect the two straps from both loops.
2) Insert the left-side strap into the left loop.
2) Insert the left-side strap into the left loop.
Insert the Right-side Strap Through the Left Loop
Insert right-side strap on top of the left-side strap through the loop in the opposite direction as the other strap.
Left Buckle (part 1)
Insert the right strap through the left buckle (Part 1)
Left Buckle (part 2)
Insert right strap through the other side of the left buckle.
Left Buckle (part 3)
Pull the left strap until it is tight against the left buckle.
Finish Left Strap
Slide left sleeve over right strap to complete the left buckle.
Right Buckle (Part 1)
Loop left strap through right buckle
Right Buckle (Part 2)
Loop left strap through other side of right buckle
Finish Right Buckle
Finish right buckle
New Configuation in Use
Completed setup