My 3D Rocket Inspired Initial

I wanted to decorate my study table so I came up with an idea to make my initial letter "J" with rocket images.So lets get inspiration from our initials.

1. Cardboard
2. Paper(also printer to print)
3. Glue Gun And Stick
4. Word Software
5. 2 Magnets
6. FeviStick
7. Patience

First,open word and add a WordArt (style 1) and enter your initial in CAPITAL.

Take a screenshot of first screen and crop the excess part.
Take the image and insert it in a new word document.

Go to picture format of the picture and remove background.
Only remove inner part of the letter.

Take one rocket background image from internet and insert them in word.Scale them so that they cover the whole page.
Then go to picture format of the letter image >>Wrap Text>>In Front Of Text.

Lastly drag the letter over the rocket image.

Repeat the same process with other letter but do not forget to flip image vertically.

Instead of adding word art, add four rectangles and do the same process of the letters with the strips.You can also take the edge measurement for making the lenght of strips presicely.

Use Glue Gun.

Use Glue Gun

Only do this step if the letter is asymmetrical.

Use Glue Gun.

This is an optinal step.

Cut a cardboard strip.

Fold 3 cm from ends and make some bridge like structure.

Trace this peice on a cardboard.

Cut 2x.

Fix them with a glue gun.

Also Stick a magnet at bottom using glue gun.

Lastly, paint the stand black.

Keep it on your study table to get insiration.