Multitool Case
![andrew 038.jpg](/proxy/?url=https://content.instructables.com/F8A/SCOU/GOW48YHA/F8ASCOUGOW48YHA.jpg&filename=andrew 038.jpg)
Supplies
![andrew 028.jpg](/proxy/?url=https://content.instructables.com/F1Y/KJ2C/GOW48YFU/F1YKJ2CGOW48YFU.jpg&filename=andrew 028.jpg)
Duct tape
Scicsors
Measuring Tape
Multitool
Scicsors
Measuring Tape
Multitool
![andrew 029.jpg](/proxy/?url=https://content.instructables.com/FO2/5FQE/GOW48YFZ/FO25FQEGOW48YFZ.jpg&filename=andrew 029.jpg)
![andrew 030.jpg](/proxy/?url=https://content.instructables.com/FHN/GBOS/GOW48YJ4/FHNGBOSGOW48YJ4.jpg&filename=andrew 030.jpg)
Measure the multitool but add a half an inch.
Then cut a peice of duct tape whatever length it is.
Then cut a peice of duct tape whatever length it is.
![andrew 031.jpg](/proxy/?url=https://content.instructables.com/F4G/5CHB/GOW48YGA/F4G5CHBGOW48YGA.jpg&filename=andrew 031.jpg)
![andrew 032.jpg](/proxy/?url=https://content.instructables.com/F5Y/W9DN/GOW48YGG/F5YW9DNGOW48YGG.jpg&filename=andrew 032.jpg)
Cut another piece and put it on the first one.
![andrew 032.jpg](/proxy/?url=https://content.instructables.com/F5Y/W9DN/GOW48YGG/F5YW9DNGOW48YGG.jpg&filename=andrew 032.jpg)
Cut another peice and put it on like the picture shows.
Then put another peice of duct tape on the sticky side as strait as you can get it.
Then put another peice of duct tape on the sticky side as strait as you can get it.
![andrew 033.jpg](/proxy/?url=https://content.instructables.com/FGR/E0AG/GOW48YJ5/FGRE0AGGOW48YJ5.jpg&filename=andrew 033.jpg)
Repeat until you have it big enough to wrap around the knife.
![andrew 035.jpg](/proxy/?url=https://content.instructables.com/FIF/W2WM/GOW48YGV/FIFW2WMGOW48YGV.jpg&filename=andrew 035.jpg)
Cut of the sides so it's neat but not to much your knife overlaps it.
![andrew 034.jpg](/proxy/?url=https://content.instructables.com/FWH/8JOT/GOW48YGP/FWH8JOTGOW48YGP.jpg&filename=andrew 034.jpg)
Wrap it around the knife and tape it
Make a litte mat sticky side up and put a lit circle or whatever shape it is on the little mat and put it on the case with the knife in it.
Then wrap a 1 foot peice of duct tape around the bottom
Then wrap a 1 foot peice of duct tape around the bottom
![andrew 038.jpg](/proxy/?url=https://content.instructables.com/F8A/SCOU/GOW48YHA/F8ASCOUGOW48YHA.jpg&filename=andrew 038.jpg)
To make the belt loop make somthing like in Step 3 and cut it in half and tape it.
I made a lid on mine but you don't have to if you think having a lid makes it less handy.
I made a lid on mine but you don't have to if you think having a lid makes it less handy.