Multimeter Holder
This instructable will show you how to create a multimeter holder for easier measuring the electricity of objects.
Materials
Materials:
Multimeter
Multimeter Test Leads
Velcro Tape
Duct Tape or Staple Gun
Wood
Assembling
Put a piece of Velcro tape about 3/4 of the Multimeter and place it on the center of the multimeter. Now place a similar size swatch of the reciprocating side of the Velcro tape on to a piece of wood.
Next put in your wires and weave them around the board of wood until there the end of the test leads have reached a good sized space (look at picture for a better discription). Next press duct tape or use a staple gun to hold down the wires. I would recommend some sort of brackets or a staple gun because you would not have to re applying them.