Walking Coffee Cup

by d.i.y master in Circuits > Reuse

3040 Views, 6 Favorites, 0 Comments

Walking Coffee Cup

PIC_0779.JPG
Hello this is Instructable will show you how to make a Moving/walking coffee cup
i am entering this in the 13 - 18 catagory

Materials

-Tape (electrical)
-wire
-motor
-battery
-screw
-coffee cup
-light (optional)
-paper clips

Step 2

PIC_0765.JPG
Connect the wires to the motor like shown

Step 3

PIC_0766.JPG
Wrap tape around the motor like shown

Step 4

PIC_0767.JPG
Connect one of the wires to the battery like shown

Step 5

PIC_0768.JPG
PIC_0769.JPG
Now take a screw and tape it onto the motor like shown in the pictures

Step 6

PIC_0770.JPG
Now the light is optional but I like it so...I’m going to show you how to attach it

Step 7

PIC_0771.JPG
Take the wire you connected to the battery and wrap around the corresponding wire of the light do the same with the other wire like in the picture

Step 8

PIC_0772.JPG
Take the wire previously taped to the battery and re-tape it like in the picture

Step 9

PIC_0773.JPG
Now cut a hole about the size of your light and then stick the light in the hole

Step 10

PIC_0774.JPG
Now do the same thing you did with the light and do it with the motor but it must be closer to the bottom

Step 11

PIC_0777.JPG
PIC_0778.JPG
Now put some paper clips on the bottom like in the pictures. make sure there attached really good. i cut slots in the cup for mine.

Step 12

PIC_0775.JPG
PIC_0776.JPG
Then tape the light and motor in their places then shove the rest of the assembly into the cup and connect the last loose wire to the battery and put on the lid then watch it go