Movie Design Earmech

This Instructible is for helping you assemble your FNAF Movie Earmech Replica

1. 3D Models
2. 2 Servos per Eye (QY3240MG)
3. M3 Screws (M3 Set)
4. M3 Countersunk Screws (CS M3 Set)
5. 2 Servo Horns per Ear (25T Servo Horns & Round Servo Horn)

This Video Shows u every Step of assembling my Earmech

For Stability i Recomend making the Piece "Ear_Rod_R or Ear_Rod_L" out of Aluminum

There are multiple ways u can control your Earmech, the Method I personally Chose is RC Equipment because its a easy to understand and fast Method to get Optimal Results. This is also what the FNAF Movie did for their Animatronics

The Movies Tech:

1. Receiver: Archer R10 Pro
2. Controller: FrSky Taranis X-Lite Pro

These are also the exact components I use in My Suits

Another Method would be to use the Free Live Servo animating Program Bottango, It simply allows you to hook up your Arduino to the PC and Move the Servos with their Software. This is Live so u can instantly see how it turns out.

If your more familiar with Programming then that is ofc also a good solution to getting it Move.

Keep in mind if you have more then 3 Servos you will definitely need a Servoshield like the PCA9685