Movable Toy Car
Our group created a 3D Printed car that will be able to move by two servo motors and code.
Supplies
In order to make this model, we used 3D print lab to create the base, and then connecting them together we used hot glue.
The first step would be to put the sticks in the holes of the car base and then connect the wheels together.
Gluing the Parts
Next, connect the servos to the two back wheels using the hot glue and string the wires under the car, not tangling them with the wheels, and connect them to the CPX on the top of the car.
Connecting the CPX to the Servo
Connect the clips to the CPX following the image above.
Create a code to make the two servo motors spin, which will move the two bac wheels.