Mousepad
![image1 (1).jpeg](/proxy/?url=https://content.instructables.com/FIS/44Q1/KX4OX50O/FIS44Q1KX4OX50O.jpg&filename=image1 (1).jpeg)
I made a mousepad from an old poster board and shirt. this is a lot cheaper than buying a big mousepad which is why I made it.
Supplies
![image3.jpeg](/proxy/?url=https://content.instructables.com/FSI/TR95/KX4OWY8I/FSITR95KX4OWY8I.jpg&filename=image3.jpeg)
![image5.jpeg](/proxy/?url=https://content.instructables.com/FPT/ONY3/KX4OWYAK/FPTONY3KX4OWYAK.jpg&filename=image5.jpeg)
For this mousepad, I used an old shirt made of polyester but any material that a mouse can glide well on works. I used an old poster board to stretch the material over but you can use a piece of cardboard
Cut Shirt
![image3.jpeg](/proxy/?url=https://content.instructables.com/FKK/4JHR/KX4OWZXN/FKK4JHRKX4OWZXN.jpg&filename=image3.jpeg)
My first step was to cut the shirt up
Glue
![image4.jpeg](/proxy/?url=https://content.instructables.com/F7C/DNAL/KX4OX2IR/F7CDNALKX4OX2IR.jpg&filename=image4.jpeg)
my next step was to stretch the shirt over the poster board and glue it down
Final Step
![image2.jpeg](/proxy/?url=https://content.instructables.com/FHV/D881/KX4OX2WX/FHVD881KX4OX2WX.jpg&filename=image2.jpeg)
I then pulled the extra material back and stapled it down