Motorized CAMERA Dolly
![IMG_0242.jpg](/proxy/?url=https://content.instructables.com/FLG/K7CC/JB6U90WJ/FLGK7CCJB6U90WJ.jpg&filename=IMG_0242.jpg)
This project started out as a hand moved camera dolly, but it evolved into a motorized dolly.
VIDEO
![Motorizing my HOME MADE CAMERA DOLLY](/proxy/?url=https://content.instructables.com/FLI/7VCH/JB6U68HO/FLI7VCHJB6U68HO.jpg&filename=Motorizing my HOME MADE CAMERA DOLLY)
Aluminium Pieces
![Capture.JPG](/proxy/?url=https://content.instructables.com/FM2/2E99/JB6U91C5/FM22E99JB6U91C5.jpg&filename=Capture.JPG)
Cutting the Pieces to Shape
![Capture3.JPG](/proxy/?url=https://content.instructables.com/FCA/WS0H/JB6U91EG/FCAWS0HJB6U91EG.jpg&filename=Capture3.JPG)
![Capture2.JPG](/proxy/?url=https://content.instructables.com/FCP/1158/JB6U91CP/FCP1158JB6U91CP.jpg&filename=Capture2.JPG)
![4.JPG](/proxy/?url=https://content.instructables.com/FUQ/BMQQ/JB6U91AA/FUQBMQQJB6U91AA.jpg&filename=4.JPG)
I cut my raw aluminium plates into these shapes.
Additional Pieces
![Capture5.JPG](/proxy/?url=https://content.instructables.com/F0N/FGI3/JB6U91EO/F0NFGI3JB6U91EO.jpg&filename=Capture5.JPG)
After i finished cutting and refining the pieces, I was ready to assemble the base of the dolly.
The Final Form of the Base (without the Motor)
![Capture6.JPG](/proxy/?url=https://content.instructables.com/FHF/S6KW/JB6U91FI/FHFS6KWJB6U91FI.jpg&filename=Capture6.JPG)
![Capture7.JPG](/proxy/?url=https://content.instructables.com/FRI/CV9E/JB6U91G0/FRICV9EJB6U91G0.jpg&filename=Capture7.JPG)
![25467692_1652381244826647_1525245542_o.jpg](/proxy/?url=https://content.instructables.com/FOZ/TNOF/JB6U91WG/FOZTNOFJB6U91WG.jpg&filename=25467692_1652381244826647_1525245542_o.jpg)
After I assembled the base, I've cut off the top part of a selfie stick and attached to the top.
Video of the first steps : https://youtu.be/xyNl7gcyfR0